Getting to know the mortuary
What is a mortuary? An industrial mortuary is a container for temporary or long-term preservation of human corpses. This container is used in hospitals, clinics, cemeteries, and forensic medicine. After death, the human body undergoes interactions that occur due to the decomposition process and cause the emission of unpleasant odors.
Due to the structure of these cold rooms, which is made of sandwich panels, it prevents chemical reactions caused by decomposition to some extent and postpones this process.
Zarei Refrigeration Industries is a supplier and producer of various types of cold storage, including fruit cold storage, meat cold storage, date cold storage, and corpse cold storage in different types.
Most of these morgues are made of high-quality stainless steel sheets that last for about 5 years and have other names such as hospital morgue, dead morgue, mortuary morgue.
Types of Mortuary: Mortuary based on capacity to types
- single cabin
- Two cabins
- Four cabins
- Six cabins
- Eight cabins
It is divided. Each cabin is for one dead body, which is usually used in villages and washrooms, one cabin or two cabins, but in hospitals and forensic medicine morgues with 6 cabins and above were used. This morgue model is divided into two Different types are produced. The first type is short-term and the second type is for long-term storage of corpses.
The first type is used for corpses that are supposed to stay in the cold room for a short time, that’s why they have thin insulation, but in the second type, the corpses are supposed to stay in the cold room for a long time, about several months, so thicker insulation and a strong cooling motor Terry is needed.
Single cabin cold storage
This morgue model has a capacity of one person, and this morgue is mostly used in rural mosques, rural washhouses, and also, if the body needs a forensic examination, a single cabin is used.
Double cabin cold storage
This model is a cold room compartment with 2 separate parts, it actually has two drawers and like other cold rooms, it has an automatic function and you can easily control the coldness inside the device. In rural and remote areas that need maintenance This two-cabin model is very practical.
Four-cabin mortuary
This mortuary model has 4 separate sections and therefore should have stronger refrigeration because it keeps the bodies healthy for a long time without rotting. This mortuary model is used in large hospitals and medical centers.
The 4-cabin model is offered in two different types, which has 4 separate parts and 4 doors that allow numbering. The second model has two doors, each part has 2 floors, but a total of 4 bodies This cold storage model has a lower price than the first type because of its structure.
Mortuary of six cabins
The 6-cabin morgue is available in different models. The 2*3 model and the 3*2 model have 6 separate doors. The 2*3 model has two doors, each door has 3 separate floors, and the 2×3 has 3 doors and each door has 2 floors. These models have a cheaper price because of their structure and they have smaller dimensions than the 6-door model.
Because in the 6-door model, each door is opened separately and only one air exits, the air exchange is less and there is little pressure on the engine. The transportation of this cold storage is done with the help of wheels.
Mortuary of eight cabins
This model of cold storage is bigger in terms of structure than the others, so it has a stronger engine and has more power. It is widely used in large hospitals and comes in two models, 8 separate doors and 4 doors, each door having 2 floors.
Other models have 9 cabins and 12 cabins, which are used in central cold storages and especially hospitals because of their larger capacity, or places that need to store corpses with a larger capacity.
Details of the mortuary
The mortuary body is made of two different materials. The first type is made of galvanized material with a coating of furnace color. This model is completely resistant to corrosion due to the laser color that is used and heating at high temperature. is.
The internal body of the morgue and stretcher must be washable due to the transportation and storage of corpses, so it is made of steel so that they can be disinfected, and a washing floor must be used to disinfect and clean the inside of the morgue so that the remains of the corpses and water that Created to be pushed out easily.
How the mortuary works
The function of a mortuary is similar to a refrigerator. The type of compressor used in these refrigerators is hermetic motors, and other equipment used in mortuary are refrigerators, condensers, evaporators, cooling fans, etc., and the cooling process is A complete process is carried out. Pharaoh gas like r134, r404, r410 is used in the construction of this cold store.
As we said before, these refrigerators have a temperature display and a thermostat, and the temperature can be easily adjusted and the display shows. The material used in the body and door of this cold store is two layers of galvanized sheet or steel. It is completely isolated and polyurethane foam is injected between these sheets, and the thicker these sheets are, the less pressure is applied to the compressor.
Kimia Panel produces a variety of polyurethane sandwich panels by using the best quality prefabricated materials in the construction of the body of these cold stores. The thickness of the body is about 10 or 15 cm according to the needs and requests of the customer and with a density It is 40.
Standard temperature for mortuary
The temperature of dead bodies is defined in two different types, long-term and short-term, in short-term cold storages, because it can be stored for a short time and has a thinner body, it can be defined from +5 to -5 degrees Celsius. And in long-term cold storages, since the bodies are kept in this chamber for a long time and there is a high possibility of decomposition, it is cooled to -20 degrees Celsius.
What are the characteristics of a good mortuary?
In order to buy a refrigerator, several factors must be considered, which are of particular importance, such as the type of body material, the method of assembly, and the type of engine used, which must be done with full quality. The material of the inner and outer body is stainless steel, or it is thick and rust-proof galvanized, stainless steel prevents rusting.
The body of this cold room is made of sandwich panel, which is certainly the presence of polyurethane foam insulation is very suitable for this purpose. Zarei Refrigeration Industries, with more than 20 years of experience, can serve you customers in the construction of this model of cold storage with the most modern and high-quality tools. The engines used in them are Danfoss, Tekame, etc., which are made in European countries. be
Cold storages with a long life have more quality and are durable compared to a short period. The motor of this refrigerator is very powerful, and the type of insulation definitely has an effect on the durability of the temperature. We hope that this information is useful.
Dear customer, you can contact our consultants to get more information about the products of Zarei refrigeration industries.
Get in touch with us:
contact numbers:
Sales expert (Ms. Akbari): 09372034645
After-sales service (Ms. Gholami): 09173299281